Interface Board for Non-Aiphone Speaker and Call Button with AI-900 System
- INSTRUCTIONS -
The AI-CP170 Interface board provides the necessary interface for any standard speaker with a 25V transformer and a
Normally Open call button to be used as a remote station on the AI-900 system. Simple wire connections are provided
for easy connection. Install the small circuit board behind the remote speaker or call button. Made for indoor use only.
WIRING DIAGRAM:
* 8 Speaker with
25V Transformer
Connector on
AI-900RS Card
Gray to
Blk
Common of
Transformer
Brn
Gray
Org
*Top view of
connector
Brown
Orange
Violet
Red
Red to
1W Tap on
Transformer
Black
Violet
*Important, When connector
is plugged into AI-900RS,
Orange should be on top
Red & Gray wires to Speaker
Violet wires to call button
Normally Open
Call Button
* For best acoustics, speaker must be located in the center of the room, mounted in the ceiling
SPECIFICATIONS:
Power Source:
Speaker:
Call Button:
Mounting:
Supplied by Main Frame (AI-900MF)
Use standard 8 ohm speaker with 25V transformer
Normally open momentary contact
Conceal behind speaker or call button
Terminations:
Wiring:
Wiring Distance:
Color-coded prewired pigtails
3 conductor shielded, homerun from Main Frame to each speaker/call button
2,625' w/ 22AWG, 4,265' w/ 18AWG
Dimensions (HxWxD): 1-3/8" x 15/16" x 1/2"
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT: (800) 692-0200
E-MAIL: tech@aiphone.com
AI-CP170 Instr.
0309PHJS
|
AMS 1084 User Manual
Blaupunkt FREIBURG KINGSTON DJ User Manual
Directed Electronics Orion Cobalt CO552 User Manual
Dual XPE1700 User Manual
Electrolux SMOOTH GLIDE E24WC75HSS User Manual
Elmo Cable Box CBL MTRENC4 User Manual
Focal Polyglass 6 V 30 User Manual
Hyundai H CDM8039 User Manual
Infinity DMC 1000 User Manual
Jensen Car Speaker JRX650 User Manual